Compared with oil-based spray, water-based spray is more environmentally friendly, and less domestic manufacturers mainly import from abroad. However, due to the high price, the cost is under great pressure.

Product features

1. Tasteless and pollution-free

2. No organic solvent

3. No volatile matter

4. Non toxic

5. Save glue

6. High solid content

Operation specification

1. Clean the surface of the material without grease, dust or other sundries.

2. Spray the nozzle evenly on the material surface:

3. After uniform spraying, it can be glued after 1-2 minutes (or the glue layer is not glued to hands);

4. When bonding, proper pressure will make the bonding effect better (some special materials or processes need to dry the glue layer, and then heat the glue layer for pressure bonding. This can be adjusted according to the requirements of customers;)

5. When the spray gun is not used temporarily, clean it with ordinary tap water;

Operation precautions

1. When using this product, pay attention to spray evenly on the surface of the object to be adhered, but the surface of the object to be adhered must be dry, clean and oil-free before spraying construction, otherwise it will affect the best bonding effect.

2. When the spraying is finished and the temperature is above 20 ℃, the pressure can be applied for bonding within 1 minute or when the glue is not sticky. The bonding material should be accurate at one time and the effect should be stable and firm.

3. When the temperature below 10 ℃ is used, the storage time should be extended a little. Or to meet the requirements of the operation process, please coordinate with our engineering department to ensure the best adhesion performance of the product!

4. In the case of 10 ℃ to - 10 ℃ and rainy days, it is necessary to master the best bonding time operation in wet weather, and pay attention to whether the material and the surface of the object are dry, otherwise it will lead to poor bonding effect.