Assembly glue is used for all kinds of assembly in wood technology, such as: gluing of 45 ° angle parts, panel splicing, cold pressing veneer, cold pressing fireproof board, etc. It belongs to high-grade wood adhesive.
High toughness assembly adhesive is a kind of fast drying single component water-based adhesive, which is used for assembly and finger joint of wood and MDF. Flexible wood veneer and wood-based panel. Even if the angle of 45 ° is not visible, the bonding strength can be very high. The modified adhesive has good wet viscosity, flexibility, heat resistance, water resistance, freeze-thaw resistance and low-temperature film-forming property. It can be used in many climates.
technical parameter
Type: water based
Appearance: milky white liquid
Viscosity: 15000-25000cps, Brookfield sp.5 ,20rpm.,25℃
PH value: Two point five -4
Solid content: 48-51%
Minimum film forming temperature: 5 ℃
usage method
Cloth glue way: machine cloth glue, spatula, brush, rubber roller and other hand cloth glue.
Glue distribution: 120-180g / m2.
Opening time: no more than 8 minutes at 20 ℃, which can be prolonged by increasing the amount of glue.
Special attention: do not mix with other glue.
Bonding conditions and effects
Moisture content of wood: 6-14%
Wood requirements: ensure the processing accuracy of materials and fresh glued surface, free of oil and dust.
Bonding strength: the highest strength can be achieved 7 days after bonding.
Heat resistance: good heat resistance.
Water resistance: good water resistance.
Health and safety
Hazard: None
Cleaning method: keep good working hygiene habits. If the glue sticks to the skin, wash it with water and soap. The used tools can be cleaned with warm water before the glue is dry.
Product storage
Storage conditions: store in sealed original containers to prevent high temperature and frost. The unused glue must be sealed to prevent dry skin and pollution.
Storage period: 6 months. It is suggested to follow the principle of "first in first use".